Norstar Additional Cards and Module Equipment

Please call 800-770-6183 for pricing or compatibility
Click on the picture to view a larger image

Order now! Go to www.NorstarSource.com for your equipment needs!

Allows addition of up to 4 central office lines, provides disconnect supervision to the central office lines with 8x24 KSU and DR3 software. For use on all versions of 8x24 systems, MICS and CICS.

Back to the top

Provides an interface for DID trunks (Direct Inward Dial)

Back to the top

Provides E&M Tie line private networking between Norstars in a private networking configuration. Contains 2 E&M Type II Trunk interfaces.
The cartridge also contains 2 DTMF receivers required to support DISA on Loop-Start Trunks. Compatible with the Modular ICS Fiber Trunk Module and the Modular 8x24 Copper Trunk Module

Back to the top

This is the caller ID card for the MICS control unit and/or the M12X0 fiber trunk module used to expand the line capability of the MICS. You must have these cards in order to receive caller ID from your dialtone provider.

Back to the top

This expansion card was designed for the M824 Control Unit to add expansion modules. There are two ports which can be used to add either the M12X0 copper trunk module or the M0X16 copper station module. If 2 ports is not enough expansion, check out the 6 port copper expansion

Back to the top

This is the 6 port expansion card used inside of the Norstar M824 KSU and allows for up to six expansion modules (M12X0 copper trunk module or M0X16 copper station module) to be added to the control unit. This card provides maximum expansion capabilities on the M824.

Back to the top

This card allows for the direct connection of a T1 digital trunk line. This will allow the connection of up 24 lines on one connection. You must have either a T1 clock card or the 6 port fiber combo card, which has T1 clocking built into an expansion card.

Back to the top

This card is used in conjunction with the NT7B74 T1 digital trunk card. It is required in order to time the channels on T1. You may also use the 6 port fiber combo card to get the clocking feature and expansion ports.

Back to the top

Compatible with the Modular ICS core, Fiber and Copper Trunk Modules, the Compact ICS core and the Modular 8x24 Copper Trunk Modules.

Back to the top

This is the 16 station expansion module for the MICS Norstar System. It connects to the MICS control unit via a fiber connection on the 2 port or 6 port fiber expansion card. Up to 16 additional telephones can be added to the system per M0X16 added.

Back to the top

Connects additional Fiber Trunk, Fiber Station, or Analog Station Modules to expand core Modular ICS capacity. There are two ports which can be used to add either the M12X0 fiber trunk module or the M0X16 fiber station module.

Back to the top

This is the 6 port expansion card used inside of the Norstar MICS control unit and allows for up to six expansion modules (M12X0 fiber trunk module or M0X16 fiber station module) to be added to the control unit. By adding 2 of these cards to the MICS the control unit will be capable of maximum capacity(Must have XC Software to add 2 expansion cards). One port on this card is also used for NAM voicemail modules to be added to the system.

Back to the top

This is the 6 port fiber expansion card for the MICS. It allows the expansion of lines and/or stations via the M12X0 fiber trunk module or the M0x16 fiber station module. The MICS control unit will support up to 2 T-1 for Digital Trunk connection, and this card has the T-1 clock card built in. By adding this card you are gaining not only six ports of expansion but also hardware clocking necessary for adding a T1.

Back to the top

This is an analog station module that allow up to 8 analog port to be added to the MICS Norstar System. It connects via an expansion port on either the 2 port or 6 port expansion card. One additional M0X8 analog module can be added by daisy-chaining from the first module, leaving your expansion ports available for other uses. No message Waiting.

Back to the top

This is an analog station module that allow up to 8 analog port to be added to the MICS Norstar System. It connects via an expansion port on either the 2 port or 6 port expansion card. One additional M0X8 analog module can be added by daisy-chaining from the first module, leaving your expansion ports available for other uses. With Message Waiting.

Back to the top

We Accept VISA, MasterCard, American Express and PayPal!

Also call us for your Avaya / Lucent needs!
Telecom Source, Inc.  2330 Fortune Drive Suite 180   Lexington, KY 40509
Toll Free 800-770-6183    Local  859-422-2500     Fax  859-335-0267
Copyright 2004.  All rights reserved.  You may not copy any part of this website without written permission from Telecom Source Inc.

Norstar, Meridian, Meridian-1, Lucent, Tie, Toshiba, ONYX, Definity, Avaya, and Panamax are registered trademarks of their respective companies.  Norstar Source is not in any way affiliated with mentioned trademark  corporations.  Warranties are made through NorstarSource.com, not the manufacturer.